• Energy Efficiency
    CEC is the abbreviation of California Energy Commission, Since 1976, the Appliance Efficiency Regulation carried out by this Group, is the only mandatory energy Efficiency regulations that can affect the non-governmental consumer behavior in the United States, which played an important role in reducing energy consumption Regulations require a minimum energy efficiency standards for the 21 class electrical products, and regularly updated, to review and incorporated into the new technology and method of energy efficiency, The newest version is (CEC-400-2012-019) In the beginning of 2012, CEC had passed the new energy efficiency requirement of battery charging system (BCS), this requirement has been launched in February 2013 and almost covers all the battery charging system, including mobile phones, bluetooth headset, bluetooth speakers, tablets and laptops, electric tools, personal care appliances, UPS and off-road vehicles, involving nickel metal hydride, nickel cadmium, lithium batteries, lead-acid batteries and other chemical types of battery systems According to the regulations, the electrical products must be tested by lab according to the corresponding standard of qualification, prove to meet the requirements, then can be sold in California . AGC had been authorized by CED since 14th January, 2013, the Qualification can be checked on the following website:。 Involed products are as following: Product Name Detection Method Consumer Audio & Video  IEC 62087:2002 External Power supply  US EPA test method dated 2004-08-11 Small battery charge system  10 CFR 430.23 (aa) – Appendix Y to Subpart B DoE DOE is the energy efficiency requirements of U.S. department of energy to the scope of the managed product , related products must meet the federal government regulations (10 CFR 430) requirement, before selling to the market, the product must be registered in the DOE. For the external power supply, should achieve the minimum level of energy efficiency level IV, and clearly marked on the product Standard: Code of Federal Regulations: 10CFR429 and 10CFR430. 10CFR429 ruled the sample selecting standard and reports standard; 10CFR430 ruled the test method and Declaration of Conformance standard AGC had passed the audit by DOE, and had been the authorized Lab of DOE, can help clients finish all the process including testing, submission, registration. GEMS/MEPS GEMS are the compulsory certification of electrical and electronic products for Australia and New Zealand market. Covers the previous main policy tools: mandatory minimum energy performance (MEPS) and energy efficiency labels (ERLS), the equipment energy efficiency program (E3); And the energy efficiency to reduce greenhouse gas emissions and enhance energy efficiency, guidance to the enterprises and consumers Since 1st October, 2013, MEPS will be not accepted, all the regulated product must be certified by GEMS, then can be sold in the market. For the registration of GEMS regulation, Appliance can not select a state registration at random, need to be registered unify in Australian regulator. AGC can provide the testing, submission and registration service for customers, involved products as following: Product Test method Labeling External power supply AS/NZS 4665.1 AS/NZS 4665.2 Simple set top boxes AS/NZS 62087.1 AS/NZS 4665.2 Complex set top box AS/NZS 62087.1 AS/NZS 62087.2.1 Televisions AS/NZS 62087.1 AS/NZS 62087.2.2 Transformers & Converters for Halogen AS/NZS 4879.1 AS/NZS 4879.2 Computer AS/NZS 5813.1 AS/NZS 5813.2
    View More
  • Summary
    Safety Lab is the earliest lab of AGC, equipped with accurate test equipment and experienced test engineer. AGC is certified by China-CNAS and Taiwan-TAF, also establish good cooperation with International Organization, in order to help manufacturers solve the safety difficulty when they prepare to launch a new product.
    View More
  • HAC testing
    Summary HAC is short for Hearing Aid Compatibility. HAC measures mobile phones and hearing aids electromagnetic compatibility, and is divided into two parts (RF and T – coil) and two immunity levels (neighbor compatibility and user compatibility). Mobile phones and hearing aids in the course of using can produce interference between each other; therefore Federal Communications Commission (FCC) requests to test mobile phones and hearing aids electromagnetic compatibility, and grades the risk of interference: T1 - T4, M1 - M4. National bureau of standards (ANSI) adopts ANSI standard C63.19. According to the regulation of Federal Communications Commission (FCC), mobile phones must conform to HAC compatibility (M3-4 and T3-4). HAC Test: 1. RF: RF-E frequency electric field, RF-H frequency magnetic field Near field of electric and magnetic field emitted by E and H field miniature probe mobile phone. When a digital mobile phone is close to a hearing aid, antenna digital pulse of the digital mobile phone will be interrupted by the hearing aid microphone and inductive pickup coil, which affects the function of the hearing aid.  2. T-coil part: the magnetic field of ABM1 sound signal and noise test the magnetic field emitted by a probe mobile phone with T coil. A digital mobile phone close to a hearing aid causes feedback. If all-digital hearing aids with antireaction, the acoustic interference can be eliminated.  The newly bought HAC test equipment of AGC is with the best performance in the market and meets the highest requirements of HAC test standards. AGC is one of the three labs equipped with HAC test equipment in Shenzhen. Otherwise AGC can provide one-stop service of test and certificate application of RF, SAR and HAC. Certification cycle is shorter than that of other labs which can do SAR or HAC. Customers no longer are upset for shipment because of cycle. Standards and Regulations States FCC test standards FCC 47 CFR§20.19; KDB285076 D01; KDB285076 D02; ANSI C63.19-2011; reference appendix。 class requirements RF:M3-M4(including M1-M4)  T-coil:T3-T4(including T1-T4) channels low, medium and high channel of each frequency band frequency bands the same as frequency band of mobile phones Note: HAC is not mandatory in other countries.
    View More
  • SAR testing
    SAR, the full name is Specific Absorption Rate, means the electromagnetic wave absorbed or consumed by human tissue of unit mass. The unit is W/Kg or mw/g. It refers to the measured value of energy absorption rate when human body exposed to the radio frequency electromagnetic field.
    View More
  • Summary
    EMC refers to a system or equipment can function well in electromagnetic environment, and meanwhile do not cause electromagnetic interference to other systems or equipments.  All test equipments in AGC EMC lab are produced by international famous manufacturer such as Germany R&S, Switzerland EMTEST, America AR and so on. There are two 3-meter semi-anechoic chambers, three shielded rooms, two electromagnetic interference test system, two electromagnetic anti- interference test system, four wireless communication equipment test system and so on, therefore AGC can provide one-stop EMC test service. Service Scope: 1. EMC test site rental service  2. EMC, EMS, RF testing and test reports issuance  3. Assist customers to apply and obtain CE, FCC, E/e-Mark, VCCI, CCC and so on certificates  4. EMC rectification service  5. EMC consultation, counseling and training  6. international standards counseling and training Standards and Regulations Standards Scope EN 61000-4-4, IEC 801-4,IEC 61000-4-4 Electrical transient bursts immunity EN 61000-4-16, IEC 61000-4-16 DC to 150 kHz continuous conducted interference EN 61000-4-6, IEC 61000-4-6 conducted interference of RF field EN 61000-4-2, IEC 61000-4-2 electrostatic discharge EN 61000-4-8, IEC 61000-4-8 power frequency magnetic field EN 61000-4-9, IEC 61000-4-9 pulsed magnet field EN 61000-4-3, IEC 61000-4-3 pulsed magnet field EN 61000-4-5,IEC 61000-4-5 surge EN 61000-4-11, IEC 61000-4-11 voltage sag, supply interruption and voltage change FCC Part 15 unintentional radioactive source and intentional radioactive source FCC Part 18 ISM EN55011,IEC/CISPR11,GB 4824 ISM EN55013,IEC/CISPR13,GB 13837 AV or broadcast products EN55020,IEC/CISPR20,GB 9383 AV or broadcast products EN55014-1,IEC/CISPR14,GB 4343.1 home appliances EN55014-2,GB 4343.2 home appliances EN55015,IEC/CISPR15,GB 17743 lamps and lanterns EN61547,GB/T 18595 lamps and lanterns EN55022,IEC/CISPR22,VCCI V-3,GB 9254 ITE EN55024,IEC/CISPR24,GB/T 17618 ITE EN62040-2 UPS. the second section: electromagnetic compatibility EN61000-6-1,GB/T 17799.1 products in residential, commercial, and light industrial environment EN61000-6-2,GB/T 17799.2 products in industrial environment EN61000-6-3,GB 17799.3 products in residential, commercial, and light industrial environment EN61000-6-4,GB 17799.4 products in industrial environment EN60555-2,EN61000-3-2,GB 17625.1 harmonic EN60555-3,EN61000-3-3,GB 17625.2 voltage flicker Main Test Items EMI Tests ·power cord conducted interference ·conducted interference of signal line or control line ·voltage fluctuation and flicker ·Radiated Emission ·Harmonic current ·Transient emission (auto parts) EMS Tests  •ESD noise immunity •EFT noise immunity of power port •EFT noise immunity of signal line or control line •conductive coupling of power line /transient noise immunity (auto parts)  •conductive coupling of signal line or control line (auto parts) •surge and lightning shock of signal line or control line •shell radiated susceptibility, noise immunity of TEM RF filed (auto parts) •noise immunity of BCI (auto parts) noise immunity of strip line (auto parts)  •conductive noise immunity of power port •conductive noise immunity of signal line or control line •voltage sag and interruption of power port Product scope ·ITE  ·lamps and rectifier ·electronic toys ·AV and similar equipment ·power transformer, supply unit and similar equipment ·UPS ·home appliances and similar equipment ·automotive electronics components and parts ·battery Lab Evironment
    View More
  • Summary
    Bluetooth wireless technology Bluetooth® wireless technology is the global wireless standard enabling simple, secure connectivity for an expanding range of devices and serves as the backbone for the Internet of Things. Bluetooth® Smart technology, through its updatable platform and low-power consumption, creates new application opportunities for the mobile phone, consumer electronics, PC, automotive, health and fitness, smart home and retail industries. Bluetooth® technology is a wireless communications system intended to replace the cables connecting portable and/or fixed electronic devices. Key features of Bluetooth® technology are robustness, low power, and low cost. Many features of the Bluetooth® Core Specification are optional, allowing product differentiation. Bluetooth® Classic is the original version of the technology using the Basic Rate and/or Enhanced Data Rate transport. The low energy feature was introduced in version 4.0 of Bluetooth® technology. A product implementing only this feature is known as a single mode device. A product implementing both Classic and low energy features is known as a dual mode device. The Bluetooth® core system consists of an RF transceiver, baseband, and protocol stack. The system offers services enabling the connection of devices and the exchange of a variety of classes of data. Many features of the core specification are optional, allowing for flexible product implementations. Bluetooth Smart Bluetooth® Smart is a revolutionary technology introduced in 2010, which provided many new benefits to manufacturers, developers and consumers. Bluetooth® Smart is the brand name for the Bluetooth® Low Energy feature first introduced in Bluetooth® Core Specification Version 4.0. Bluetooth® Smart goes beyond being simply power-friendly; it is application-friendly too. The technology is power-friendly because it uses dramatically less power than other wireless technologies. It's application-friendly because it costs less and offers flexible development architecture for creating applications for Bluetooth® Smart sensors. This allows developers to bring everyday objects like heart-rate monitors, toothbrushes, and shoes into the connected world and have them communicate with applications that reside on the Bluetooth® Smart compatible smartphones, tablets, or similar devices those consumers already own.
    View More
  • Why choose AGC
    Our Competence and advantage 1st Bluetooth SIG recognized Bluetooth® Qualification Expert (BQE) in mainland China Unique Bluetooth SIG recognized Bluetooth® Training Instructor and Bluetooth® QEP Auditor in mainland China. 1st and currently unique Bluetooth SIG recognized Bluetooth® Qualification Testing Facility (BQTF) owns two brands BR/EDR/LE RF test systems in Southern China BQTF recognition AGC built Bluetooth® Products Testing Laboratory with huge investment, and the lab had been recognized by Bluetooth SIG as Bluetooth® Qualification Testing Facility (BQTF).  At the end of year 2014 the AGC newly purchased Bluetooth® RF Test System – InterLab® Bluetooth® RF Test Solution came into service officially, with the new test system AGC becomes the unique BQTF in Southern China which owns two brands BR/EDR/LE Bluetooth® RF test systems. BQE AGC employed the 1st Bluetooth SIG recognized Bluetooth® Qualification Expert (BQE) in mainland China whom was awarded as Bluetooth SIG Top 10 BQE for several years and approved the most Bluetooth® Qualification projects in mainland China.  With the own BQTF and top BQE AGC provide one-stop excellent qualify Bluetooth® Qualification services to Bluetooth® product developers, manufacturers and brand owners.
    View More
  • Bluetooth Compliance Program
    License Agreement The Bluetooth® Compliance Program includes the process members complete to demonstrate and declare the products they build, brand or otherwise represent as their own comply with the requirements of the Bluetooth® license agreements. The two licensing agreements are:  Bluetooth® Patent & Copyright License Agreement — a reciprocal license between each Bluetooth SIG Member to the intellectual property that each member owns  Bluetooth® Trademark License Agreement — a license between the Bluetooth SIG (owner of the Bluetooth® trademark) and each member authorizing use of the Bluetooth® trademarks Bluetooth Mark Bluetooth SIG encourages member companies to review the conditions of the license agreements and consult their legal counsel with any questions regarding the applicable requirements. If a company wants to use the Bluetooth® trademarks, the company must complete the Bluetooth® Compliance Program. There are two steps of the process members complete using an online tool administered by the SIG — Qualification and Declaration.
    View More
  • Bluetooth Qualification Process
    Qualifications Process The Bluetooth® Qualification Process refers to the qualification of a specific design of Bluetooth® wireless technology by an individual Member. The design applies and is limited to those specific portions of a product implementing and being compliant with a Bluetooth® Specification, as declared in the Implementation Conformance Statement (“ICS”). A qualified design of Bluetooth® wireless technology shall meet all Bluetooth® Qualification Requirements on an implementation (i.e. a product) of that design.  Bluetooth® Qualification shall refer to a specific version of the Bluetooth® Specification and to all Bluetooth® Qualification Requirements pertaining to such version.  Qualifications Requirements Bluetooth® Qualification Requirements comprises of the following:  - Testing  - Documentation  - Document Filing  - Assessment  - Supplier Declaration of Conformity (SDoC)  - Compliance to Auditing and Enforcement  The Bluetooth SIG assesses an administrative fee on completion of this process (known as the Declaration fee) to cover the costs of operating the compliance program and providing other important member tools. The fee is USD 4,000 per declaration for Associate and Promoter members and USD 8,000 per declaration for Adopter members. Note: there are instances where members may list multiple products under one declaration if these products implements same Qualified Design(s). Additionally, small or start-up member companies can purchase up to two declarations for a fee of USD 2,500 each, if they meet the requirements of the Innovation Incentive Program (IIP).  Qualifications Process Qualification Process for New Design or Modified Qualified Design Qualification Process for Product using End Product or Subsystem Qualified Design(s)
    View More
  • Bluetooth Enforcement Program
    Enforcement Policy Members not completing the compliance program requirements or misusing the Bluetooth® trademarks for the products they build, brand or otherwise represent as their own, are subject to enforcement action. Effective 5 August 2014, the Board of Directors of Bluetooth SIG Inc. updated the Bluetooth SIG's trademark license enforcement policy.  The Enforcement Program consists of market surveillance, listing audits and compliance folder audits. All members are subject to Enforcement Program activities.  The scope of market surveillance covers all products containing Bluetooth® wireless technology. If the Bluetooth SIG is unable to verify a product’s compliance to the Compliance Program requirements using the listing and documentation database, the company will be notified of their potential non-compliance.  It is important to note that customs officials use the Bluetooth SIG’s online listing database to verify a product’s compliance to the license agreements. If customs is unable verify a product’s compliance to the Bluetooth SIG’s requirements, the product may be seized and held until the requirements have been satisfied or destroyed if left unresolved.  Process Enforcement Escalation Process
    View More
  • Bluetooth Qualification Testing-Profile/Service
    Classical Bluetooth Profile Profile 描述 3DSP 3D Synchronization Profile A2DP Advanced Audio Distribution Profile AVRCP Audio/Video Remote Control Profile BIP Basic Imaging Profile BPP Basic Printing Profile CTN Calendar, Tasks and Notes Profile DI Device ID DUN Dial Up Networking Profile FTP File Transfer Profile GAVDP Generic Audio/Video Distribution Profile GNSS Global Navigation Satellite System Profile GOEP Generic Object Exchange Profile GPP Generic PIM Profile HCRP Hard Copy Cable Replacement Profile HDP Health Device Profile HFP Hands-Free Profile HID Human Interface Device Profile HSP Headset Profile IOP Interoperability Test Specification MAP Message Access Profile OPP Object Push Profile PAN Personal Area Networking Profile PBAP Phone Book Access Profile SPP Serial Port Profile SYNC Synchronization Profile SAP SIM Access Profile VDP Video Distribution Profile Smart Bluetooth Profiles/Services (GATT-based) Profile/Service Description ANP Alert Notification Profile ANS Alert Notification Service BAS Battery Service BCS Body Composition Service BLP Blood Pressure Profile BLS Blood Pressure Service BMS Bond Management Service CPP Cycling Power Profile CPS Cycling Power Service CSCP Cycling Speed and Cadence Profile CSCS Cycling Speed and Cadence Service CGMS CGM Service CGMP CGM Profile CTS Current Time Service DIS Device Information Service ESS Environmental Sensing Service ESP Environmental Sensing Profile FMP Find Me Profile GLP Glucose Profile GLS Glucose Service HIDS HID Service HOGP HID over GATT Profile HRP Heart Rate Profile HRS Heart Rate Service HTP Health Thermometer Profile HTS Health Thermometer Service IAS Immediate Alert Service IPSP Internet Protocol Support Profile LLS Link Loss Service LNP Location and Navigation Profile LNS Location and Navigation Service NDCS Next DST Change Service PASP Phone Alert Status Profile PASS Phone Alert Status Service PXP Proximity Profile RSCP Running Speed and Cadence Profile RSCS Running Speed and Cadence Service RTUS Reference Time Update Service SCPP Scan Parameters Profile SCPS Scan Parameters Service TIP Time Profile TPS Tx Power Service UDS User Data Service WSP Weight Scale Profile WSS Weight Scale Service
    View More

A total of 1 pages

Contact Info
  • Visit Our Company at

    2/F., Building 2, No.1-4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang, Bao'an District, Shenzhen, Guangdong, China

  • Have a Questions? Call us

    Phone : 400 089 2118

  • Contact with Us

    Email :

welcome to AGC
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!