banner

Automotive Electronic Parts EMC Test

Overview

The laboratory is equipped with 1000V/ 200A (maximum 20KW) power supply system to meet the test requirements of new energy automotive components.


Standard

1.  Electro Magnetic Interference Test



1)  Radiated Emission

Test StandardsCISPR25, GB/T 18655, EN 50498, ECE R10, Enterprise Standards

Test  Ability

Test Frequency: 0.1MHz~6000MHz

Background NoiseConform to the requirements of Class 5 in CISPR 25.


2)  Conducted Emission

Test Method: Voltage MethodCurrent Probe Method

Test StandardsCISPR25, EN55025, GB/T 18655, Enterprise Standards

Test  Ability

Test Frequency: 0.1MHz~150MHz

Background NoiseConform to the requirements of Class 5 in CISPR 25.


3) Transient Conduction Emission Test

Test StandardsISO 7637-2, GB/T 21437.2, Enterprise Standards

Test Ability: Conform to the test requirements of 12V/24V systems.


4) Magnetic Field Radiated Emission Test

Test StandardsEnterprise Standards



2 Electro Magnetic Susceptibility


1Radiation Immunity TestALSE Method

Test StandardsISO 11452-2, GB/T 17619, Enterprise Standards

Test Ability

Frequency Range: 80MHz~200MHz & 3200MHz~6000MHz, Test Intensity100V/m

Frequency Range: 200MHz~3200MHz, Max Intensity: 200V/m


2) Radar Band Test

Test Standards: Enterprise Standards

Test Ability

Frequency Range: 1.2GHz~1.4GHz & 2.7GHz~3.1GHz Max Intensity: 600V/m


3)  Bulk Current Injection

Test Standards: ISO 11452-4, GB/T 17619, Enterprise Standards

Test Ability

Frequency Range: 0.1MHz~400MHz Max Intensity: 400mA


4)  Electrical transient conduction along supply lines

Test Standards: ISO 7637-2, GB/T 21437.2, Enterprise Standards

Test AbilityConform to the requirements of 12a2b3a3b45a5b.


5)  Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

Test Standards: ISO 7637-3, GB/T 21437.3, Enterprise Standards

Coupling ModeCCCICCDCC


6)  Low Frequency Magnetic Field Immunity Test

Test Standards: ISO 11452-8, Enterprise Standards

Test Methods: Radiating Loop Method, Helmholtz Coil Method

Test Ability

Frequency Range: 20 Hz~150 kHz, Max Intensity: 1000A/m

Frequency Range: 0Hz, Max Intensity: 3000A/m


7)  Electrostatic Discharge Test

Test StandardsISO 10605, GB/T 19951, Enterprise Standards

Test Voltage: 30KV



3. Electrical Loads


1Electrical Loads

Test StandardsISO 16750-2, GB/T 28046.2, Enterprise Standards

Test AbilityConform to all the requirements in ISO 16750-2.


2Micro pulse test

Test StandardsVW 80000Enterprise Standards

Test Ability

Arbitrary pulse waveform can be edited according to customer's requirements

Max Test Voltage/Current is ±60V/±50A

Rise/fall change time: 10μs;

Editable waveforms: LinearSinusoidal WavesSquare WavesTriangular WavesLogarithmic Waves.



4. Certification Service


1E-mark certification

All vehicles and their safety spare parts entering the European Common Market must meet the requirements of ECE Regulation, and the test certification of this series of on-board products is E-mark certification. E-mark implements the ECE Regulation, which is formulated by the ECE. It mainly applies to the European region. The issuing agency is the relevant European government departments, such as the Ministry of Transport.

AGC can provide E-mark certification service for EMC performance of automobiles Electronic Parts (test regulation is ECE R10), and the issuing country is Luxembourg (E13) or Spain (E9).


2 EN 50498

EN 50498 certification is the self-declaration of the manufacturer to the automotive parts products that enter the European Common Market without disturbance rejection function. It is mainly applicable to the rear-loading products such as vehicle chargers, refrigerators and heaters. EN 50498 certification does not need to be issued by relevant European government departments. It has a shorter cycle and lower cost.

 

Send a Message

If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Contact Info
  • Visit Our Company at

    2/F., Building 2, No.1-4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang, Bao'an District, Shenzhen, Guangdong, China

  • Have a Questions? Call us

    Phone : 400 089 2118

  • Contact with Us

    Email : agc@agc-cert.com

welcome to AGC
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

home

services

about

contact