banner
  • UL/ETL/MET/CSA
    Summary In America, although safety certification is not compulsory. In fact, if the product doesn’t have a safety mark on it, it’s hard to access the market. Retailers and distributors want to sell products with the safety mark which recognized by the public. When consumers buy the products, they also always first to see if there is a safety mark on the products. UL, ETL, MET, CSA labs are National Recognized Test labs recognized by OSHA. They all can perform the test on the products, and issue the certificates after the tests pass. Application requirements Any electric, mechanical and electrical product with safety logo on behalf of the manufacturer accepting regular factory inspection to ensure quality consistency, implies that this product comply with relevant requirements of USA and Canada safety certification. Certification bodies UL ETL MET CSA Mark Nature Voluntary Voluntary Voluntary Voluntary Initial Factory Inspection Yes Yes Yes Yes Quarterly Factory Inspection Yes Yes Yes Yes annual fee Yes Yes Yes Yes The certificate is valid Factory inspection normal, normal pay an annual fee, then remain in effect, if the new flag out, to do the standard update
    View More
  • IC
    Summary IC is short for Industry Canada, As a government agency,provides testing standards for analog and digital terminal equipment,in charge of authentication for electronic products exported to Canada market , stipulate import electronic product must pass relevant EMC certifications.  Its Responsible products are generally broadcast television equipment, IT equipment, radio equipment, telecommunications equipment, medical equipment etc..,which is similar to USA FCC,IC is currently limit the electromagnetic interference. Application requirements Type Wireless Products Authority IC Lead Time 3-5 working days Local testing request EMI Local representative request IC No. (registered Company) Document request 1.  Schematics Diagram 2. Block diagram 3. User manual 4. Bom list Sample q'ty 2 sets Remark XXX Q&A Q1. How to register IC's Company No.? A:On the IC website http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00051.html application by E-filing system, the official Canada staff review and then delivered to the registered e-mail, when the length of 2-3 working days. Q2. Product UPN (Unique Product Number) specifications and requirements A:UPN's length is not more than 11, uppercase letters AZ and numbers 0-9 and can not contain special characters such as: #, /, - and so on. Q3. Canada is believed to be representative of what? A:Letter must be made on behalf of Canada and registered office address in Canada on the IC website signed and promised to be able to deal with the review of this product in Canada Q4. IC authentication types are there? A:IC certification divided into five, first as a separate type certification, the second multi-type certification, the third for the multi-named fourth to the second category allows changes, the fifth class of the certificate of ownership transfer.
    View More
  • FCC certification
    Summary US FCC certification stands for Federal Communications Commission, established in 1934 by the COMMUNICATIONACT is an independent US government agency, directly responsible to Congress. FCC by controlling the radio, television, telecommunications, satellite and cable to coordinate domestic and international communications. Involving more than 50 US states, Colombia and the United States belong to the region to ensure the safety of life and property-related radio and wire communications product. US FCC certification is divided into three certification FCC-ID Certification, FCC-DOC certification, FCC-VOC certification. Application requirements Type Wireless Authority TCB Lead Time 3-5 working days Local testing request EMI Local representative request N/A Document request 1. Schematics Diagram 2. Block Diagram 3. User Manual 4. Parts List 5. Operational Description Sample q'ty 2 sets Remark XXX
    View More
  • CEC
    Summary CEC is short for California Energy Commis-sion's。Appliance Efficiency Regul-ation launched in 1976 of this organization is the only one mandatory energy saving regulation which could affect the non-governmental consumer behavior,playing a important role in reducing energy consumption. According to the regulations, electrical products must be tested by qualified laboratories with the appropriate standards ,proved to meet the requirements before they can be sold in California. Regulations stipulate the minimum energy efficiency standards for 21 categories of electrical products,and regularly updated,in order to review and bring into new energy efficiency technologies and methods,The latest version is(CEC-400-2012-019). AGC testing has received a certificate issued by the California Energy Commission on January 14, 2013,officially became a recognized qualification testing laboratory by CEC,the quality could be checked on it’s official website :http://www.energy.ca.gov/appliances/forms/index.html。
    View More
  • DoE
    Summary DOE is about Energy efficiency requirements for products managed by US Energy Department,related products must meet federal regulations (10 CFR 430) requirements,it must be registered and recorded to DOE for the previous sales.After that the product could be checked online at DOE official website.For external power supply,Should reach the minimum energy efficiency rating IV grade,and marked out on the product clearly.  Standard basis:Code of Federal Regulations:10CFR429&10CFR430. Between them.10CFR429 provides sample selection specifications and report specifications. 10CFR430 specifies test methods and Declaration of Conformity specification. AGC testing has been recognized by the US Department of Energy,became a qualified laboratory accredited by DOE,which will help you complete the test, submission, registration full set of processes. To learn more about DOE certification ,please contact with our relevant staffs. Summary Taiwan's National Communications Commission (NCC: National Communication Commission), NCC requires all telecommunications terminal equipment, low-power RF radio frequency controlled motor and telecommunications equipment all need to get in the future in the form of recognition, before being sold on the market. Label: Application requirements NCC (RF) Authority NCC Local representative request No Local testing request Yes Lead time 4 weeks or so Sample quantity At least 2 sets Basic Files AGC Application form 申请商营利事业登记证,需加盖彩色大小章 Chinese traditional User Manual+NCC Warning Schematic Diagram Black Diagram Product specification Antenna specification Power of Attorney Other specified documents Remark 1, Model Regulation: a certificate stands for one model of one trademark; 2, Taiwan's applicant must provide the license for running the business of controlled telecommunications equipment via RF, and the profit-seeking enterprise registration certificate must be the Download version. Discover the latest version of profit-seeking enterprise registration certificate URL: http://gcis.nat.gov.tw/open_system_1.htm
    View More
  • NCC
    Summary Taiwan's National Communications Commission (NCC: National Communication Commission), NCC requires all telecommunications terminal equipment, low-power RF radio frequency controlled motor and telecommunications equipment all need to get in the future in the form of recognition, before being sold on the market. Label:  Application requirements NCC (RF) Authority NCC Local representative request No Local testing request Yes Lead time 4 weeks or so Sample quantity At least 2 sets Basic Files AGC Application form 申请商营利事业登记证,需加盖彩色大小章 Chinese traditional User Manual+NCC Warning Schematic Diagram Black Diagram Product specification Antenna specification Power of Attorney Other specified documents Remark 1, Model Regulation: a certificate stands for one model of one trademark; 2, Taiwan's applicant must provide the license for running the business of controlled telecommunications equipment via RF, and the profit-seeking enterprise registration certificate must be the Download version. Discover the latest version of profit-seeking enterprise registration certificate URL:  http://gcis.nat.gov.tw/open_system_1.htm
    View More
  • BSMI
    Summary BSMI  is the English abbreviation of "Bureau of Standards, Metrology and Inspection". According to Taiwan's Ministry of Economic Affairs bulletin, from July 1, 2005, product entering Taiwan must be implemented the regulatory for two aspects: electromagnetic compatibility and safety. Depending on the product, which will be divided into the following three authentication methods: batch type approval test; authentication login; declaration of conformity. Label:  Application requirements BSMI (EMC+Safety) Authority BSMI Local representative request No Local testing request Yes Lead time Compliance statement about 2 weeks Verification of the landing & type approval for 5 weeks Sample quantity At least 2 sets Basic Files AGC Application form Commodity verification login application form (Checklist form) 申请商营利事业登记证,需加盖彩色大小章 Chinese instruction User Manual 繁体中文Label Schematic Diagram Black Diagram PCB Layout & PCB Location BOM/Parts List Other specified file Note 1, Go to the website if BSMI to find whether products are regulated products: http://civil.bsmi.gov.tw/bsmi_pqn/index.jsp  2, the certification cycle vary depending on the different of products;  3, credentials vary depending on different products;
    View More
  • OFTA
    Summary OFTA certification is the former Hong Kong Telecommunications Authority (the Office of the Telecommunications Authority, OFTA) of Hong Kong for short communications product certification program. From April 1, 2012, the functions and responsibilities of the Broadcasting Authority and the Telecommunications Authority (TA) has been merged into the Communications Authority (Communications Authority OFCA: the Office of the Communications Authority, www.coms-auth .hk,), as the regulation of the broadcasting industry and the telecommunications industry, a single regulatory body. Meanwhile, the Office of the Telecommunications Authority and the Television and Entertainment Licensing Authority under the relevant divisions, have merged into the Office of the Communications Authority (Communications Office www.ofca.gov.hk/), as the executive arm of Communication Board. All approval for radio communication equipment used in Hong Kong are required to meet the technical specification developed by the Communications Authority (Communications Authority). For products sold in Hong Kong, such as: Radio communications equipment (such as 409 MHz walkie-talkies, citizens band radios, cordless phones, wireless microphones, wireless LAN equipment, audio and video transmitters), should post signs (such as shown) of Communications Authority on the body or the box.
    View More
  • SRRC
    Summary Radio transmitting equipment type approval refers to the radio transmitting equipment put into use before the research, production, import, purchase, technical indicators, in accordance with the parameters of the frequency spectrum technology management system. "Radio regulations of the People's Republic of China" regulation, development, production and import of radio transmitting equipment working frequency and frequency shall be in conformity with the provisions on the administration of the radio, and submitted to the radio administration agency for approval or for the record. For radio equipment testing, certification before entering the market is the world of radio management practice, from the source to reduce radio interference, ensure the spectrum scientific, reasonable and effective management, unified use of important technical means. SRRC approval is the main content about the frequency of radio transmitting equipment, spectrum, transmission power, frequency tolerance, bandwidth (or emission signal spectrum characteristics of), out-of-band emission and stray emission spectrum parameters, such as nuclear. Limited spectrum resources is directly related to the spectrum parameters can be scientific use of order can get effective protection, air waves, radio safety can be powerful guarantee.  Application requirements Lead time: at least 35 working days(Not included in the provincial Commission for the first instance) Materials needed for certification: Approved by the radio transmitting equipment model in the application form; The approval of radio transmitting equipment model of a power of attorney "; Operating instructions; Specifications; Schematic circuit diagram; Principle diagram; PCB diagram; A figure; Photos (positive and negative motherboard according); Rf line attenuation values; Test specification; Antenna gain; Driver and software; The company's business license; Company profile (development course, technical ability, production capacity, quality warranty card system) quality management system certification. Quantity of samples: Download Q&A Q1:What circumstances need provincial Commission for the first instance, period how long? A:First product need to save each year provincial Commission for the first instance, the first trial cycle related to company province WuWei testing cycles are usually is 5 working days. Q2:The approval for examination and approval of time how long? A:20 working days or so can a type approval certificate. Q3:What information is required by the provincial Commission for examination A: The approval of radio transmitting equipment model in the application form, the original and the copy of business license, basic condition and quality guarantee system to apply for the unit, and last year's radio equipment production and sales, the radio enterprise annual production situation table, equipment, color a (embody application units, the structure of the equipment model, serial number, size). 。
    View More
  • CTA
    Summary Countries to access public telecommunication network using the radio equipment and telecommunications terminal equipment, involving the network interconnection network access of telecommunications equipment for licensing. A network access license system of telecom equipment must obtain network access license issued by the ministry of information industry; Didn't get get licence may access using public telecommunication networks and in the domestic sales. Telecommunications equipment directory network licensing system shall be supervised by the ministry of information industry in conjunction with the product quality supervision department under the state council and promulgated. Telecommunications equipment manufacturing enterprises (hereinafter referred to as enterprises) to apply for network access of telecommunications equipment permits must conform to the laws, regulations and policy provisions of the state. Network licensing telecom equipment must conform to the state standards, communication industry standards and the provisions of the ministry of information industry. Telecommunications equipment manufacturing enterprises shall have perfect quality assurance system and after-sales service measures. Production enterprises to apply for network access of telecommunications equipment permits, shall be attached to the product quality supervision department under the state council approved and issued by the testing agency authorized by ministry of information industry issued by the test report or certification body product quality certification. Testing institutions to test the network licensing of telecommunications equipment basis, test procedures and test report issued shall meet the national or the provisions of the ministry of information industry.  Application requirements Lead time: 30 working days(not include the time for reform) materials needed for certification Hardware Materials: Prototype, chargers(need through the CCC certification), battery, false electricity, cable (with fixed magnetic ring, magnetic ring need and to indicate the type, specification, manufacturer information), headphones, a set of complete packaging, RF line, PCB panel, shell (including shell, keyboard, Lens, motor) Documentation: 1、System board chip and open declaration, both the photo color 2、The double card statement, bluetooth statement 3、Sample of technical confirmation slip 4、Send the technical parameters of confirm the table 5、Electromagnetic compatibility list, security components list 6、Mobile: BOM, printing circuit diagram, the schematic circuit diagram, the explosion diagram 7、Manual 8、MTnet equipment inspection confirmation 9、Telecom equipment introduction 10、Mobile telephone survey 11、BOMmainboard BOM and complete machine BOM 12、Battery statement tables, specification 13、The fuselage characters and patterns 14、Smartphones provide the intelligent terminal software configuration information form Quantity of samples for CTA: Depending on the specific product or system  Q&A Q1: What data to need for CTA? A:Application unit, scheme, patch, after-sales network is introduced; The latest relevant certificates, such as business license, environmental protection approval, certificate of ISO system, and build official seal; Relevant original documents; Company photo; Legal person contact information and id card scan. Q2: How long does it take after CTA is accepted? A:20 working days (Periodic change is bigger, the actual shall prevail)。 Q3: CTA premise to prepare A: Models need to be confirmed, to ensure the only available; Can apply for IMEI after confirmation, if the CDMA products, need MEID; Prototype production must keep consistent with the listed products.
    View More
  • CCC
    Summary China Compulsory Certificate for short,CCC certificate or 3C certificate. In December 2001,AQSIQ(General Administration of Quality Supervision,Inspection and Quarantine of the People’s Republic of China) issued 《Mandatory product certification regulations 》,Imported goods safety quality license system and the system of electrical product safety certification was instead of mandatory product certification system. .It is a kind of the statutory compulsory safety certification system. It is also a basic practice which is widely used in the world to protect consumers' rights , protect consumers personal property safety. 《Implementation of the compulsory product certification product catalogs》 includes Household appliances, Cars, Safety glass, Medical apparatus and instruments, Electric wires, Toys and so on. The CQC is designated for 3C certificate work for 18 categories of 146 kinds of products of CCC catalogs . Main business of the CQC includes China Compulsion Certification, CQC mark certification, the voluntary product certification pushed by state(good agricultural standard certification, The organic product certification etc..).CQC is also The third party certification body authorized by state to carry out energy efficiency, water conservation and Environmental protection product certification. The quantity of customers to do certification is the first of the certification body in the nation and the forefront of national certification body. CCC label:  Application requirements Application requirements:CCC Certification Lead Time About 50 working days。 Information required for CCC certification: 1、 An original application form.(Sign company chop and name of applicant on following places ): 1)Authorizer signature 2)Signature authorized by bailor of certification. 2、Business License of CHINA Mainland 3、Company organization code certificate of CHINA Mainland( 4、ODM/OEM agreement(It`s needed if manufacturer is different from producer with singed by both,If manufacturer,producer,applicant are all different,It will be needed singed by all) 5、The Original Certificates.(Applicable to change certificate contents). (Please pay attention to the Valid Date of new certificate,so when changes are required to return the original certificate ).  6、Original factory inspection questionnaire.(Applicable to Factory first application , sign producer company chop will be needed) Information required for SMQ 1、Schematics Diagram. 2、PCB plans 3、List of EMC key pieces 4、List of Safety key pieces 5、Differences Description(Applicable to several models) 6、CB reports & Certificates(Applicable to CB certificate change to CCC certificate)  7、Chinese nameplate 8、CCC Certificate of Power Adapter(Applicable to there are Power Adapters) 9、50% prepayment for customers without agreement 10、If original reports not issued by SMQ, should provide original Electronic reports. 11、Frontpage of both Factory inspection report and Lease Contract. 12、Electronic reports or copies of Original certificates.(Applicable to Change Request) 13、09 and 16 categories of products needed to provide The highest frequency of internal product produced or when using. CCC certificate sample quantities needed:Depending on the Specific product or standard.  Q&A Q1.what conditions need to examine factory? A:First time to do this type of product requires examine factory. Q2.Lead time for examining factory? A: Determined by schedule .(It is rather changeable ,depending on the actual situation).Actually,about20 working days. Q3.How long to issue certificates? A:CCC Type Test is about 8~12 working days,examine factory is about 20 working days。Examine factory finished, in the case of non-conformity items are completely closed,it will cost 10 working days. Q4.Cost of CCC ? A:About RMB20000~RMB22000,depending on specific product or Standard.(Not including Service charges and so on)
    View More
  • IDA
    Summary Singapore's Infocomm Development Authority (IDA, Infocomm Development Authority of Singapore), the statutory body responsible for information and communication management. http://www.ida.gov.sg/ iDA use and management of telecommunications products, mainly based on technical specifications developed by iDA, who need to sell or telecommunications equipment used in Singapore are required to apply iDA. Application requirements IDA Type RF / Telecom device Authority IDA Certification method SDoC / Certification Local representative request Yes (who has telecommunication dealer’s license) Local testing request No Lead time 2~3 weeks Sample q’ty at least 2 sets Basic Files AGC Application form CE-RF report Related information of the local representative User Manual Product Specification Schematic Diagram Black Diagram BOM PCB Layout & Location External & Internal Photos of EUT Label &Local & Size Remark 1, the certificate is valid for 3 years;  2, the report needs to be qualified;
    View More
<< 1 2 3 4 5 6 7 >>

A total of 7 pages

Contact Info
  • Visit Our Company at

    2/F., Building 2, No.1-4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang, Bao'an District, Shenzhen, Guangdong, China

  • Have a Questions? Call us

    Phone : 400 089 2118

  • Contact with Us

    Email : agc@agc-cert.com

welcome to AGC
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

home

services

about

contact